DHG450-7T-R Hydraulic timber grab with rotation 5 – 8 ton

Operating weight

5 – 8 t.

Weight

400 kg

Oil flow

50 l/min.

Oil flow rotation

12 l/min

Operating pressure

300 bar

Height

1.000 mm

Amount of cilinders

1

Closing force

24 kN

Nr. of rotation motors

1

Pressure of rotation

190 – 210 bar

Width opened

1.540

Shell width small

735 mm

Shell width wide

500 mm

Minimum diameter

70 mm

Description

  • High manoeuvrability due to 360º hydraulic rotation – DSG-R
  • From the DHG602-R up, all models are equipped with dual rotation motors. A great benefit of this is that power distribution on the slewing ring is much better.
  • Wear-resistant Hardox 400 cutting Edges All DHG-R timber grabs are equipped with an substantial slewing ring. As a result, all models are ultimately suitable for the heaviest applications, even for demolition work.
  • From the DHG802 up, all models are equipped with two cylinders. Consequently the power distribution is much better on the shells, as a result of which they close simultaneously.
  • Due to the special cylinder design and the equaliser, movement is kept to a minimum, resulting in almost no wear to the internal hoses.
  • DHG timber grabs cylinders are equipped with cushion dampening, resulting in the shells closing without creating shocks to the excavator or damage to the main frame of the grab.
Optional
  • Available with load holding valve
  • Sprayed in the required colour
  • Doubling of the rotation motors

Additional information

Operating weight

5 – 8 t.

Weight

400 kg

Oil flow

50 l/min.

Oil flow rotation

12 l/min

Operating pressure

300 bar

Height

1.000 mm

Amount of cilinders

1

Closing force

24 kN

Nr. of rotation motors

1

Pressure of rotation

190 – 210 bar

Width opened

1.540

Shell width small

735 mm

Shell width wide

500 mm

Minimum diameter

70 mm